Prof Yeong Wai Yee

Congratulations to Dr Ng Wei Long for another highly cited paper!

​

​

Congratulation to Prof Yeong Wai Yee and alumni from her group Prof Sing Swee Leong and Dr. Goh Guo Dong for being ranked World's Top 2% Scientist in 2024.

Article title: Polyvinylpyrrolidone-based bioink: influence of bioink properties on printing performance and cell proliferation during inkjet-based bioprinting

"Healing of Chronic Wounds: An Update of Recent Developments and Future Possibilities" is awarded highly cited paper in SRIS Celebration Awards.

We have been informed that the above-mentioned TD has been filed on 13 June 2024 and accorded German patent application numbers 10 2024 116 691.6 and 10 2024 116 692.4 respectively. Congrats to the inventors!

Title: Gripper Device, Robot Arm With A Such Gripper Device And Robots

​

1. TE2D: 3D Tissue cultures Embedded with Electrodes as bioelectronic Devices ,
2. Making of TE2D: An electrode-ready 3D tissue cultures,
3. Real-time In Situ Measurement of Hydrogel Curing Process using Machine Learning-guided UV Monitoring,
4. Adaptable and dynamic 3D printed bioelectronic platform using multiplexed sensing and stimulation for the directed guidance of biomimetic tissue.

Title: Progress and Opportunities for Machine Learning in Materials and Processes of Additive Manufacturing

Prof Yeong recognized as Top 50 Asia Women Tech Leaders 2024

Title: An Ultra-Low Cost, Wide Range, Cross-Talk Free, Near Human Skin Sensitivity Fingertip Tactile Sensor

Title: Joint angle prediction for a cable-driven gripper with variable joint stiffness through numerical modeling and machine learning

Title: Decision matrix for integrating 3D printing technologies for biomanufacturing of alternative testing model

Title: Polymeric Materials for Biomedical Implants

Title: A 3D Printing-Enabled Artificially Innervated Smart Soft Gripper with Variable Joint Stiffness

Title:3D Printed Multimaterial Gripper With Embedded Sensors And Variable-Stiffness Joints

Singapore provisional patent application number 10202302134R

Title: A 3D Printed Multimaterial Bilayer Chainmail-Structured Actuator

Singapore provisional patent application number 10202302110R.

Predicting the number of printed cells during inkjet-based bioprinting process based on droplet velocity profile using machine learning approaches

Understanding droplet jetting on varying substrate for biological applications

Title: Customizing nutraceuticals through 3D printing

Prize: Third Place

3D printing and 3D-printed electronics: Applications and future trends in smart drug delivery devices

Title: Polyvinylpyrrolidone-based Bio-ink: Influence of Bio-ink Properties on Printing Performance and Cell Proliferation During Inkjet-based Bioprinting,

The Design and Development of Instrumented Toys for the Assessment of Infant Cognitive Flexibility

V Ramanathan, MZ Ariffin, GD Goh, GL Goh, MA Rikat, XX Tan, ...

Sensors 23 (5), 2709

​

Data imputation strategies for process optimization of laser powder bed fusion of Ti6Al4V using machine learning

GD Goh, X Huang, S Huang, JLJ Thong, JJ Seah, WY Yeong

Materials Science in Additive Manufacturing 2 (1), 50

 Title : Progress towards innovation and technolgy for gender equality.

Wire embedding method for 3D printing

CNA What's The Big Deal? - S1E4: 3D Bioprinting

Scientists believe that soon, we will be able to order human organs on demand. Host Rishi Budhrani discovers what lies ahead for the futuristic technology known as “3D bioprinting”

Alumni from our group, Asst Prof Sing Swee Leong (NUS) is also listed in the same list.

Alumni from our group, Asst Prof Sing Swee Leong (NUS) is also listed in the same list.

The paper titled "Improving printability of hydrogel-based bio-inks for thermal inkjet bioprinting applications via saponification and heat treatment processes" has been accepted in "Journal of Materials Chemistry B"

The paper titled "3D Printing of Robotic Soft Grippers: Toward Smart Actuation and Sensing" has been accepted in "Advanced Materials Technologies"

Scroll down to the bottom of the page to view the list of highly-cited papers

-

Her paper titled "Jetting Droplets on Semi-Solid Substrate For biological applications" has been recognized as the one of the best papers at The international Conference of Additive Manufacturing for a better world organized by SUTD.

Scroll down to the bottom of the page to view the list of highly-cited papers

The book chapter titled "The emerging frontiers in materials for functional three-dimensional printing" is one of the chapter in the textbook "Digital Manufacturing" published in Elsevier.

The Graduate College awards are given annually to the most deserving graduating students for their achievements during their studies at NTU, and to their advisors. The Research Excellence Award recognises original, creative, and widely disseminated student research with significant impact on the field or society.

The paper titled "Ultra Low Cost, Crosstalk Free, Fast Responding, Wide SensingRange Tactile Fingertip Sensor for Smart Gloves" has been accepted in Advanced Materials Interfaces"

Scroll down to the bottom of the page to view the list of highly-cited papers

The paper titled "A review on machine learning in 3D printing: applications, potential, and challenges" published in Artificial Intelligence Reviews was listed as hot paper for Jan/Feb 2022.

The Lindau Nobel Laureate Meetings, established since 1951, is a globally recognised exchange that serves as a platform for Nobel Laureates and young scientists worldwide to engage in knowledgeable crosstalk . Post NTU TRACS’ nomination and Prof Yeong’s recommendation, Dr Lee underwent a multi-step application and selection process to attend this prestigious event. Applicants were reviewed by the scientific review panel of the Council for the Lindau Nobel Laureate Meetings based on their academic and research achievements, motivation and dedication to research work and other extracurricular activities. After 6 months of evaluation, Dr Lee was selected to participate in the 71th Lindau Nobel Laureate Meeting (Chemistry) in Germany from 26 June to 1 July 2022 with other international young scientist. Dr Lee hopes to establish future international research collaboration with fellow young scientists and Nobel laureates during the 6 day event in the field of chemistry and related discipline.

Preliminary Investigation on the Geometric Accuracy of 3D Printed Dental Implant Using a Monkey Maxilla Incisor Model"

The paper titled "Fabrication of Design Optimized Multifunctional Safety Cage with Conformal Circuits for Drone Using Hybrid 3D Printing Technology"

The paper titled "The role of block-type support structure design on the thermal field and deformation in components fabricated by Laser Powder Bed Fusion."

Happy to share that Prof Yeong is now an Editorial Board Member in Biofabrication ( IF 9.9)

Good job to Huang Sheng and congrats.
​

The paper titled "Fracture Behavior of Laser Powder Bed Fusion Fabricated Ti41Nb via In-situ Alloying."

​

Today marks one of the proudest moments of this year, as we launched the MAE 40th anniversary commemorative book. It is now available as ebook online

The paper titled "Anomaly Detection in Fused Filament Fabrication Using Machine Learning."

The paper titled "Controlling Droplet Impact Velocity and Droplet Volume: Key Factors to Achieving High Cell Viability in Sub-Nanoliter Droplet-based Bioprinting."

​

The paper titled "3D extrusion bioprinting."

Congratulations to Prof. Yeong Wai Yee for being listed as the top 2% scientists by Elsevier. The selection is based on the top 100,000 by c-score (with and without self-citations) or a percentile rank of 2% or above.

Congratulations to Prof. Yeong Wai Yee for being one of the awardees in the SG100WIT. The SG100WIT recognises and celebrates women based in Singapore who have been inspiring and have made significant contributions to the tech industry.

The manuscript title is "Machine Learning for 3D Printed Multi-Materials Tissue-Mimicking Anatomical Models"

The manuscript title is "Investigating the effectiveness of three-dimensional printed anatomical models compared to plastinated human specimens in learning cardiac and neck anatomy: A randomized cross-over study"

The manuscript title is " 3D printing of multi-layered multi-material electronics: a review"

The paper titled " Quasi-Static Indentation and Sound-Absorbing Properties of 3D Printed Sandwich Core Panels".

The manuscript title is " 3D printing of multi-layered multi-material electronics: a review"

The paper titled " Tissue engineering and 3D printing of bioartificial pancreas for regenerative medicine in diabetes.

The textbook titled " 3D printing and Additive manufacturing of electronics" .

The paper titled " Tissue engineering and 3D printing of bioartificial pancreas for regenerative medicine in diabetes .

Highly cited papers refer to the top 1% of publication in the respective field. Scroll down to view the list of highly cited papers.

​

The paper titled " Additively Manufactured Continuous Carbon Fiber Reinforced Thermoplastic for Topology Optimized Unmanned Aerial Vehicle Structures .

The paper titled " Emerging Metallic Systems for Additive Manufacturing: In-situ Alloying and Multi-metal Processing in Laser Powder Bed Fusion.

Congrats to Huang Sheng for being awarded the certificate of Excellence in reviewing for his significant contribution made to the quality of Acta Materialia.

The paper titled " Fabrication and Characterization of 3D Bioprinted Triple-layered Human Alveolar Lung Models.

The paper titled " High-Resolution Novel Indirect Bioprinting of Low-Viscosity Cell-Laden Hydrogels via Model-Support Bioink Interaction. Bioprinting of unmodified soft extracellular matrix into complex 3D structures has remained challenging to fabricate. Herein, we established a novel process for the printing of low-viscosity hydrogel by using a unique support technique to retain the structural integrity of the support structure. We demonstrated that this process of printing could be used for different types of hydrogel, ranging from fast crosslinking gelatin methacrylate to slow crosslinking collagen type I.

This project aims to use 3D bioprinting technology to reconstruct the Asian skin model, which closely mimics the biochemical and physiological properties of human skin. The project also aims to develop an Asian skin-on-a-microfluidic plate device to establish a high-throughput screening method, improve productivity and repeatability, and to enable the development of new qualitative measurement protocols.

The paper titled " Resolving the porosity-unmelted inclusion dilemma during in-situ alloying of Ti34Nb via Laser Powder Bed Fusion. In this paper, we present a mechanism to achieve simultaneous reduction of inclusion content and porosity in in-situ alloyed Ti34Nb samples. Such achievement marks a significant breakthrough in the process optimization of in-situ alloying with LPBF?. A patent based on the study has also been filed High Speed Homogenization And Pore Mitigation Strategy For In-Situ Alloying Via Laser Powder Bed Fusion (LPBF).

The article titled Process-Structure-Properties in Polymer Additive Manufacturing via Material Extrusion: A Review published inCritical Reviews in Solid State and Materials Sciences was recognized as a hot paper.This hot paper was published in the past two years and received enough citation to place it in the top 0.1% of the papers in the academic field.

The paper titled "Bioprinting of Collagen: Considerations, Potentials and Applications."​

Why is it so difficult to print collagen-only bioink? In this article we dived deeper into the issue from a bottom-up approach to find out why bioprinting collagen has shown limited success. Key research areas that would enhance the functionality of bioprinted collagen are highlighted.

The paper titled "Process-structure-property of Additively Manufactured Continuous Carbon Fiber Reinforced Thermoplastic: An Investigation of Mode I Interlaminar Fracture Toughness."

The book chapter titled "Powder Bed Fusion."

Congratulations to Dr Sing Swee Leong on his NTU Presidential Post-Doc Fellowship 2020 award. He will be able to conduct independent research as a Presidential Postdoctoral Fellow for 2 years.

We are pleased to announce that Dr Ng Wei Long from our HP-NTU Corporate Lab has been awarded the functional title of Research Assistant Professor, under a new NTU research staff scheme. The Research Assistant Professorship (RAP) scheme is targeted at early career researchers in competitive research areas (by nomination only). Wei Long is one of the selected few in this very first batch of awardees.

Please join us in congratulating Wei Long on his new title!

The paper titled "Engineering macroscale cell alignment through coordinated toolpath design using support-assisted 3D bioprinting."

The paper titled "A review on Machine Learning in 3D printing: Applications, Potential, and Challenges."

The paper titled "Laser Powder Bed Fusion for Metal Additive Manufacturing: Perspectives on Recent Developments."

The paper titled "A review of 3D printing processes and materials for soft robotics."

The paper titled "Development of a three-dimensional printed heart from computed tomography images of a plastinated specimen for learning anatomy."

We are excited to share that our research, published in Advanced Materials Interfaces, is among the top 10% most downloaded papers!

We are excited to share that your research, published in Advanced Materials Technologies, is among the top 10% most downloaded papers!

The paper titled "3D direct printing of silicone meniscus implant using a novel heat-cured extrusion-based printer" has been accepted for publication in Polymers. (Impact Factor: 3.164, Q1, Rank: 17/87 Polymer Science)

Good job to Guo Dong and congrats.
​
TItle: Process-structure-property of additively manufactured continuous carbon fiber reinforced thermoplastic composite

The paper titled "Laser powder bed fusion of titanium-tantalum alloys: Compositions and designs for biomedical applications" has been accepted for publication in Journal of the Mechanical Behavior of Biomedical Material. (Impact Factor: 3.485, Q1, Engineering, Biomedical, Rank 18/80)

Good job to Guo Liang and congrats.

TItle: Aligning carbon nanotubes via Aerosol Jet Printing for printable Electronics

The paper titled "Bioprinting of Multimaterials with Computer-aided Design/Computer -aided Manufacturing" has been accepted for publication in International Journal of Bioprinting.

The paper titled "Silicone 3D Printing: Process Optimization, Product Biocompatibility, and Reliability of Silicone Meniscus Implants" has been accepted for publication in 3D Printing and Additive Manufacturing (Impact Factor: 3.259, Q2, Rank 16/49 in Engineering, Manufacturing )

The paper titled "Vat polymerization-based bioprinting – process, materials, applications and regulatory challenges" has been accepted for publication in Biofabrication (Impact Factor: 7.236, Q1, Rank 6/80 in Engineering, Biomedical )

The paper titled "Additive manufacturing of multiple materials by selective laser melting: Ti-alloy to stainless steel via a Cu-alloy interlayer" has been accepted for publication in Additive Manufactuing (Impact Factor: 7.173, Q1, Rank 1/49 in Engineering, Manufacturing )

Title: Additive Manufacturing of Multiple materials by selective laser melting: Ti-alloy to stainless steel via a Cu-alloy interlayer

Visiting the AM group at KU Leuven and meeting Prof Kruth.

The GYSS is a gathering of young researchers worldwide for a chance to interact with eminent scientists and technology leaders. The Summit provides a platform for conversations on science and research, technology innovation and society, and solutions to global challenges.

More information about the submit can be found here:

The paper titled "Aerosol-jet Printed Preferentially Aligned Carbon Nanotube Twin-line for Printed Electronics" has been accepted for publication in ACS Applied Materials and Interfaces (Impact Factor: 8.456, Q1, Rank 16/94 in Nanoscience and Nanotechnology and Q1, Rank 27/293 in Materials Science, Multidisciplinary )

The paper titled "Microstructure modeling for metallic additive manufacturing: a review" has been accepted for publication in Virtual and Physical Prototyping (Impact Factor: 6.825, Q1, Rank 2/49 in Engineering, Manufacturing and Q1, Rank 43/293 in Materials Science, Multidisciplinary )

itle: 3-D Direct Printing of Silicone Meniscus Using A Novel Heat-Curing Extrusion Based Silicone Printer

Co. Supervisor: Song Ju Ha

QE title: Selective Laser Melting Of Highly Textured Ti‐Nb Alloy via In‐situ Alloying and Its Mechanism of Fracture and Fatigue

The paper titled "Effect of Solution Heat Treatment on Microstructure and Mechanical Properties of Laser Powder Bed Fusion produced Cobalt-28Chromium-6Molybdenum" has been accepted for publication in Materials Science and Engineering: A (Impact Factor: 4.081, Q1, Rank 68/293 in Materials Science, Multidisciplinary and Q1, Rank 7/76 in Metallurgy & Metallurgical Engineering)

Fantastic news!

Congrats to Prof Yeong for emerging victorious at the distinguished TCT Awards 2019, held at National Conference Centre in Birmingham, UK.

Kudos to each and every member of the team for your efforts too!

For more information of the TCT awards, please click on this link:

Good job to Edgar and congrats

Namic conference series in Marine and offshore industry at Ntuitive NTU as part of Singapore Marine week 2019.

Title: Fundamental of AM

Event details:

Awesome job to Dr Lee the great presentation titled: Bioprinting for Burn Management: A Layer at a Time at the 12th Asia Pacific Burn Congress (APBC 2019)!

Please see this link for more info on the event:

Prof Yeong was invited to speak at the SkillsFuture Festival to share about the Future of Manufacturing and 3D Printing. It was held at NUS’s University Cultural Centre.

Senior Minister of State, Mr Chee Hong Tat was also present at our sharing as a Guest of Honour!

​

​

Heartiest congratulations to Prof Yeong for being nominated as finalist for TCT Women in 3D Printing Innovator award!

Click on this link to cast your vote and show your support:

Swee Leong gave a talk to the NRP students and have fun showing the latest 3D printing technologies to them.

Nanyang Research Program (NRP) is a premium research program by NTU.

We had group meeting and also cross sharing sessions with professor and students from Asia University, Taiwan.

Also, a farewell for our esteemed member of the team, Joel. Thank you for your great help and good luck for your next endeavour!

Congrats to Joel and Prof Yeong for new paper accepted by BMC Medical Education! Keep up the good work!

Paper titled: Multi-material Three Dimensional Printed Models for Simulation of Bronchoscopy

2018 impact factor: 6.825

Categories :

(Engineering, Manufacturing – 2/49 Q1)
(Materials Science, Multidisciplinary – 43/293 Q1)

​

Prof. Yeong is the associate editor for VPP. Clickthe link below to find out more about VPP.

Congrats to both Swee Leong and Eric. We are proud to have two teams selected for semi finals in Nanxun Innovation & Entrepreneurship Challenge 2019.

Congrats to Guo Liang for new paper accepted by Nanoscale! Keep up the good work!

Paper titled: SESSILE DROPLETS CONTAINING CARBON NANOTUBES: A STUDY OF EVAPORATION DYNAMIC AND CNTs ALIGNMENT FOR PRINTED ELECTRONICS

Impact factor of Nanoscale: 7.233, Q1

Congrats to Wei Long for new paper accepted by Tissue Engineering Part B:Reviews! Keep up the good work!

Our team attended a work visit to Commonwealth Scientific and Industrial Research Organisation (CSIRO) at Australia. It was a fruitful and fulfilling trip!

We had a great time at our group sharing and gathering! Thank you prof for the sumptuous buffet!

Also, thank you and farewell to Dr Shweta. Good luck in your next endeavour in Denmark!

2 new openings for PhD studies!

3D printing for food and pharmaceutical.

3D printing and bioprinting can be applied in 3D printed food, ingestible implant and pharmaceutical compound.

In this project, the students will develop new printing technology and novel printing materials for these emerging applications.

Bioprinting and tissue engineering via microfluidics technology

In this project, an ultrafine microfluidics system will be utilized to deposit biomaterials and cells.

The project includes developing the governing physics of cell jetting, formulation of materials for microfluidics printing and also developing a proof of concept tissue printing applications.

This is an interdisciplinary project involving physics, materials, cell culture and tissue engineering.

Congrats to Vishwesh, Guo Dong, and Shweta for new paper accepted by Journal of Sandwich Structures and Materials! Keep up the good work!

Paper titled "Quasi-Static Indentation Analysis on Three-Dimensional (3D) Printed Continuous-Fiber Sandwich Composites".

Congrats to Jia Min and Wei long for new paper accepted by Applied Physics Reviews! Keep up the good work!

Paper titled "Resolution and shape in bioprinting: strategizing towards complex tissue and organ printing".

Impact factor of Applied Physics Reviews: 12.894, Q1 journal.

Prof Yeong visited the and gave a public seminar on society 5.0 &3D Printing at the Tecnológico de Monterrey located in Mexico.

Congrats to Huang Sheng! He was awarded best oral presentation at the 2019 4th International Conference on Composite Material and Material Engineering (ICCMME) that is being held in Tokyo, Japan. Great job and keep it up!

Researchers from the Singapore Centre for 3D Printing School of Mechanical and Aerospace Engineering Nanyang Technological University have published a review summarising research on carbon nanotubes (CNT) and their use in 3D printing.

The research paper titled, Directed and On-Demand Alignment of Carbon Nanotube: A Review toward 3D Printing of Electronics, categorizes the alignment methods of carbon nanotubes and summarizes various applications of the material. Furthermore, the paper discusses how the material has been used to develop improved composites and how it can contribute to the development of future devices using 3D printing....

Find out more about the article using the link below.

Congrats to Shweta, Guo Liang, and Zhen Kai for new paper accepted by ACS Sensors! Keep up the good work!

Paper titled "Wearable Bandage based Strain Sensor for Home Healthcare: Combining 3D Aerosol Jet Printing and Laser Sintering". (Impact factor of ACS Sensors: 5.711, Q1 journal.)

The paper is available at link below:

Congrats to Guo Liang and Shweta for new paper accepted by Advanced Materials Interfaces! Keep up the good work!

Paper titled "Directed and On-demand Alignment of Carbon Nanotube: A Review Towards 3D Printing of Electronics".

The paper is available at link below:

Congrats to Guo Dong, Swee Leong, Joel, Guo Liang and Yee Ling for new paper accepted by Critical Reviews in Solid state and Materials Sciences! Keep up the good work!

Paper titled "Process-structure-properties in Polymer Additive Manufacturing via Material Extrusion: A review". available at

The article title reads, "Adjusting the Design, Material, and Parameters of a 3D Printed Strain Gauge with Computational Simulation".

A trio of researchers from the Singapore Center for 3D Printing at Nanyang Technological Universityrecently published a paper, titled “Aerosol Jet Printed Strain Sensor: Simulation Studies Analyzing the Effect of Dimension and Design on Performance,” about their work in using computational simulation to adjust the design, material, and parameters of a 3D printed strain gauge made with aerosol jet technology...

Find out more about the article using the link below.

​

​

Congrats to Shweta and Guo Liang for new paper accepted by IEEE Access! Keep up the good work!

Paper titled "Aerosol Jet Printed Strain Sensor: Simulation Studies Analyzing the Effect of Dimension and Design on Performance ".

Book Title: Selective Laser Melting of Novel Titanium-Tantalum Alloy as Orthopaedic Biomaterial

Available at:

Congrats to Eric, provisional USA patent application has been filed on Silicone Meniscus With Slow-Released Mechanism. This work will be useful for meniscus-related therapies and treating sports injuries.

Filing date: 17 Sep 2018.

We have 6 highly cited papers for May/June 2018. Highly cited papers refer to top 1% of paper in respective field.

In-situ alloying using SLM and DED was selected as one of the projects highlighted during the CSIRO ASEAN Hub launch event (17 September 2018). The hub facilitates CSIRO's science, commercial and research for development engagements across Singapore, Indonesia, Vietnam, Thailand, Malaysia and Philippines.

In-situ alloying using SLM was featured at NTUititve's booth at the event (18-19 September 2018).

This technology is offered on IPI SG.

Congrats to URECA student, Lee Yi Wei, for achieving second place in Engineering Category of the 2018 Discover URECA Poster Competition!

Congrats to Guo Dong, Shweta, Yee Ling for new paper accepted by Advanced Materials Technologies! Keep up the good work!



Paper titled "Recent progress in Additive Manufacturing of Fiber Reinforced Polymer Composite"

Prof Yeong will be giving a talk at the conference on 15 August 2018, organised by Singapore Chinese Chamber of Commerce and Industry.

Topic: "How to be a smart factory of tomorrow"

Click the link below for more information.

Congrats to Swee Leong for new paper accepted by International Journal of Refractory Metals and Hard Materials! Keep up the good work!

Paper titled "Selective laser melting of titanium alloy with 50 wt% tantalum: Effect of laser process parameters on part quality".

The Lush Prize is a major initiative aiming to bring forward the day when safety testing takes place without the use of animals.

This year 56 projects and scientists from 17 countries made it through to the final judging process.

Check out The Lush Prize website below for more info.

​

Check out the list at the publication page

39 Students from 9 countries and across all disciplines are attending the summer class by Prof Yeong.

Our latest paper, "3D Bioprinting Processes: A Perspective on Classification and Terminology" has been accepted for publication in International Journal of Bioprinting! Congrats Swee Leong!

Our work on 3D Printing was selected as one of the most promising upcoming technologies, to be showcased to Prime Minister of India, His Excellency Narendra Modi, on his visit to NTU on 1 June 2018.

Dr. Shweta exhibited the innovations in 3D printing technology.

We had a awesome time at our group sharing, followed by a sumptuous buffet lunch!

We have a new publication on Bioelectronics “3D printed Bioelectronics Platform with Embedded Electronics” in MRS Advances. Congrats to Dr. Shweta and team.



Available online at: